Campus Moncloa

Scientific publications

Scientific publications linked to the cluster

2013

• Baño, V., Arriaga, F. and Guaita, M. (2013). Determination of the influence of size and position of knots on load capacity and stress distribution in timber beams of Pinus sylvestris using finite element model. Biosystems Engineering (Biosyst. Eng). Vol. 114 pp. 214-222.
  Category: Construction & Building Technology       Quartile: 2º
  Impact factor: 1.354        
• Vega, V., Arriaga, F., Guaita, M. and Baño, V. (2013). Proposal for visual grading criteria of structural timber of sweet chestnut from Spain. European Journal of Wood and Wood Products, Vol. 71, nº 4, pp 529-532.
  Category: Construction & Building Technology       Quartile: 2º
  Impact factor: 0.888        
• Arriaga, F., Íñiguez-Gonzalez, G., Esteban, M. and Fernandez-Cabo, J.L. (2013) Simplified model for the strength assessment of timber beams joined by bonded plates. Volume 25, Issue 8 (August 2013), 980–990. Journal of Materials in Civil Engineering.
  Category: Construction & Building Technology       Quartile: 2º
  Impact factor: 0.959

2012

• Fernandez-Cabo, J.L., Arriaga, F., Majano-Majano, A., Iñiguez-González, G. (2012) Short-term performance of the HSB® shear plate-type connector for timber-concrete composite beams. Construction and Building Materials, 30, 455-462.
  Category: Construction & Building Technology       Quartile: 1º
  Impact factor: 2.293        
• Arriaga, F., Íñiguez-Gonzalez, G., Esteban, M. and Divos, F. (2012) Vibration method for grading of large cross section timber of Spanish coniferous species. Holzforschung. Vol. 66, pp. 381–387.
  Category: Construction & Building Technology       Quartile: 1º
  Impact factor: 2.416        

2011

• Baño, V., Arriaga, F., Soilán, A. and Guaita, M. (2011) Prediction of bending load capacity of timber beams by finite element method simulation of knots and grain deviation Biosystems Engineering (Biosyst. Eng). Vol. 109 pp. 241-249.
  Category: Construction & Building Technology       Quartile: 2º
  Impact factor: 1.354        
• González-Bravo, C., Arriaga-Martitegui, F., Íñiguez-González, G. y Maldonado-Ramos, L. Prótesis metálicas para la reparación de cabezas de vigas de madera degradadas. Steel profiles for repairing deteriorated timber beam ends. Informes de la Construcción. Vol. 63, 521, pp. 37-45 2011.
  Category: Construction & Building Technology       Quartile: 3º
  Impact factor: 0.260        

2010

• Esteban, M., Arriaga, F., Íñiguez, G., Bobadilla, I. y Mateo, R. (2010) Influencia de las fendas en la resistencia de la madera estructural. The effect of fissures on the strength of structural timber. Materiales de Construcción. Mater. Construcc., Vol. 60, 299, 115-132, jul.-sept.
  Category: Construction & Building Technology       Quartile: 3º
  Impact factor: 0.730        
• González-Bravo, C., Arriaga-Martitegui, F., Maldonado-Ramos, L y Díez-Barra, R. Refuerzo de vigas de madera mediante perfiles metálicos situados en la cara superior. Bending reinforcement of timber beams with steel cross sections on the upper face. Materiales de Construcción (mater construcc). Vol. 60, 298, 123-135. Abril-junio 2010.
  Category: Construction & Building Technology       Quartile: 3º
  Impact factor: 0.730